Water Heater Repair in Arlington, TX
- Licensed Texas plumbers
- Gas and electric, tank and tankless
- Same-day visits when the schedule allows
Local snapshot
- Water
- Arlington Water Utilities (City of Arlington); Pierce-Burch plant (Lake Arlington) and John F. Kubala plant (Cedar Creek and Richland Chambers)
- Hardness
- 91.4 mg/L, about 5.3 gpg, utility-reported (via tapwaterdata.com); city's own CCR figure not located
- Gas
- Atmos Energy
- Electric
- Oncor delivery; retail provider chosen by customer
- Permits
- City of Arlington One Start Center (ArlingtonPermits.com)
- From Carrollton
- about 30 to 35 minutes via SH 161 and I-30 off-peak, 26.5 to 29.3 km straight-line
What these two ZIPs cover, and who rents here
ZIP 76011 is northeast Arlington around AT&T Stadium and Globe Life Field, along Interstate 30 between Collins Street and Nolan Ryan Expressway, with offices and light industrial users on Division Street and Collins. ZIP 76006 adjoins it and borders Grand Prairie (75050) and Euless (76040), covering about 7.6 square miles. The University of Texas at Arlington campus lies south of both, in a different ZIP.
Both ZIPs are renter territory: 75 percent of occupied units in 76006 and 83 percent in 76011 are rented, and multi-family buildings make up about 73 percent of housing in each. Median home values are $294,000 in 76006 and $247,000 in 76011.
Arlington runs its own water system
Arlington Water Utilities treats water at two plants. Pierce-Burch draws from Lake Arlington, and John F. Kubala draws from Cedar Creek and Richland Chambers reservoirs. A utility-reported hardness of 91.4 mg/L, about 5.3 grains per gallon, makes this the softest water in this group of pages, which is gentler on elements and heat exchangers than the 9.9 grains in neighboring Grand Prairie.
Lake Arlington is also the TRA's source for Euless and Bedford, but Arlington's own plants and distribution system, not TRA, serve these ZIPs.
Apartment closets, building heaters and landlord equipment
In a complex off Division Street or Collins Street, a missing hot water usually comes from a tripped breaker, a failed element in a closet unit, or a pilot outage on a building heater. Repair vs. replace in a landlord property is a property-manager decision; for tenants, reporting the leak or outage quickly limits ceiling damage. See no hot water for the first checks.
- Check the breaker on electric units, or the pilot light on gas units.
- Look for water at the base of the tank or a tripped leak detector.
- Report outages to the manager if the heater is shared by the building.
- Do not reset a unit that is leaking or smells of gas.
Stadium district businesses
Hotels, sports bars, event venues and restaurants clustered around the entertainment district run heaters that see their heaviest load on Cowboys and Rangers game days, and a failed unit on an event weekend can shut a kitchen or a hotel floor. Commercial heater service there often means booster heaters, recirculation pumps and dishwashers on dedicated hot lines.
One Start Center and ArlingtonPermits.com
Arlington's permit guide lists plumbing among permits that are required. Applications go through ArlingtonPermits.com or the One Start Center on the second floor of City Hall, and inspections requested before 7 a.m. are scheduled the same day, with later requests slipping to the next business day. Permit fees are not quoted by phone.
Game-day weekends, summer peak and January freezes
Summer loads and event weekends push heaters hardest, while a January freeze stresses exposed outdoor closets at older apartment buildings near the stadium district. Oncor supplies power to these ZIPs, and Atmos Energy supplies gas, so outages in February 2021 meant relighting pilots and checking elements after the grid returned.
Arlington ZIP codes we cover
| ZIP | Area | What to know |
|---|---|---|
| 76006 | North Arlington, bordering Grand Prairie and Euless | 75 percent renters, 73 percent multi-family; Arlington ISD; moderately hard city water; Atmos gas, Oncor wires. |
| 76011 | AT&T Stadium, Globe Life Field, I-30, Division and Collins corridors | 83 percent renters, 72 percent multi-family; offices and light industrial; event-driven commercial hot water demand. |
Questions people ask
What do water heater repairs cost in Arlington?
Typically $150 to $600 for thermostats, elements, thermocouples and relief valves, with gas control valves and larger commercial parts higher. Treat them as ballpark figures, not quotes. A leaking tank is replaced rather than repaired.
Who supplies Arlington's water, and how hard is it?
Arlington Water Utilities, the city's own system, treats water at the Pierce-Burch and John F. Kubala plants. Utility-reported hardness is about 91 mg/L, or 5.3 grains per gallon, which is moderately hard.
Do ZIPs 76006 and 76011 include the UTA campus?
No. 76011 covers the stadium area along Interstate 30, and 76006 lies beside it and Grand Prairie; the University of Texas at Arlington is south of both in a different ZIP.
Is a permit needed for a water heater swap in north Arlington?
Plumbing permits are required, and the city runs them through ArlingtonPermits.com and the One Start Center at City Hall. A licensed plumber normally obtains the permit and schedules the inspection.
My apartment has no hot water. Who fixes it?
In most rentals the water heater belongs to the landlord, so tell the property manager. Check the breaker or the pilot first if you can do so safely. A shared building heater may mean several units are affected.
Is it worth repairing a hot water heater in a rental unit?
That is the landlord's call, but an element, thermostat or pilot repair on a tank under about 10 years old is almost always cheaper than replacement. A tank leaking at the base should be replaced to avoid ceiling and floor damage below.
Ready when your heater isn't.
One call covers every ZIP on this site.